Mechforce - Variable Timing Crush Washers for Muzzle Device Alignment

MSRP:
Was:
Now: $14.95
(You save )
(27 reviews) Write a Review
Mechforce - Variable Timing Crush Washers for Muzzle Device Alignment

Description

Features:

  • Comes with (4) crush washers with four different thicknesses each offsets un-torqued muzzle device with 90 degree increment.
  • One of these washer is guaranteed to deliver the right orientation positioning with the correct torque value regardless of the muzzle device and barrel manufacturers. 
  • Crush Washers are made from special engineered, heat treated mill-spec material that has been fine turned balanced between high spring rate and ductility to meet the function requirement of "crushed with high spring tension without cracking".
  • Comes with black phosphate surface treatment for corrosion resistant.
  • User manual included with full installation instructions.

Description:

For those muzzle devices that require orientation positioning (top ports pointing to 12 o'clock),  it is quite often that the threads on the muzzle device and the barrel are not fitting well in term of mismatching of thread starting point - causing the muzzle device installation cannot meet required torqued value at correct orientation. The muzzle device may be over torqued and thread may be damaged if the crush washer's thickness is unable to space out the muzzle device and the barrel the right amount. In another situation, the muzzle device may be not torqued enough.

 

To solve this crush washer problem, MECHFORCE-USA has developed the world first Variable Timing Crush Washers that is guaranteed to deliver the right orientation positioning with the correct torque value regardless of the muzzle device and barrel manufacturers.  The VT crush washers are precision CNC machined into four different thicknesses that can orientate muzzle device in 0 degree, +90 degree, +180 degree and +270 degree when fully threaded in un-torqued, which will allow the user to pick the best one and deliver the intended orientation with the right amount of torque.

 

Specifications:

 

  • Precision CNC Machined
  • Black phosphate surface treatment
  • Special engineered, heat treated mill-spec material
  • Developed and Made in the USA

Additional Details

SKU:
P50010

27 Reviews

  • 5
    If your having trouble timing a muzzle device on an AR 15 this will make it easy!

    Published by Shane on Nov 16th 2018

    This was exactly what I need to time a muzzle brake. Took five minutes to install and solved my problem. Don't hesitate, make your life easier and keep these onhand! I'm gonna buy a second set! Top quality manufacturing!

  • 5
    This really made it easy to put a muzzle brake on a rifle with ...

    Published by Laverne Otto-Phitre on Nov 16th 2018

    This really made it easy to put a muzzle brake on a rifle with the correct side (bottom) where I wanted it. If the standard "GI" crush washer doesn't do the job, don't mess around with anything else - go straight to this product.

  • 5
    This is what you need to properly install a muzzle ...

    Published by robert l on Nov 16th 2018

    This is what you need to properly install a muzzle brake. This gave me around 100 degrees of torque which is around 20-30 for lbs. this will be my go to for future builds.

  • 5
    Sometimes size matters

    Published by ZombieWrangler on Nov 16th 2018

    Made all the difference in getting my MB on straight. Included crush-washer was 90" off when tight, the different sizes allowed me to get it tuned correctly for maximum effect. Worked perfectly on the 1/2 x 28 threaded end. I only needed 1/4 but next time I'll have the leftovers to try.

  • 5
    Just what you need.

    Published by toolness1 on Nov 16th 2018

    Washer that came with my brake was impossible to index, this kit had the perfect one.

Related Products